产品分类
新闻中心
联系我们
- 地 址：深圳市罗湖区水贝二路特力大厦607
- 电 话：0755-25512007
- 传 真：0755-25512007-2005
- 邮 箱：sales@skwtech.com
产品编号：RC-S926
产品价格：￥0.00
产品简介：索尼 SONY RC-S926 NFC IC Chip芯片
RC-S801 Module
RC-S802 Module
RC-S926 IC Chip
- Low current consumption
- Cable and wireless interface
- Magnetic field detection function
The NFC Dynamic Tag is a wireless module with a cable interface to enable data transmission between NFC reader/writers (Android smartphone, NFC port, PaSoRi, etc.) and other electronic equipment or gadgets.
Features
Cable and wireless interface
A cable interface uses our own triple-wire half-duplex communications and can be controlled even with a low- speed host CPU.
For development of applications on the reader/writer side, it is possible to use existing products, such as SDK for NFC, which are able to access the wireless interface of the NFC Dynamic Tag.
* For any application development, the customer is required to follow the specifications.
* We are not planning to offer an interface library.
Low current consumption
The current consumption during operation is less than 1 mA and during standby is kept at 0.1 μA or less to provide power supply conditions suitable for a battery-operated device.
Magnetic field detection function
The NFC Dynamic Tag includes a function by which the magnetic field generated by the reader/writer can be detected and the host CPU informed.
Emulation of NFC Forum Type 3 Tag
The NFC Dynamic Tag can emulate an NFC Forum Type 3 Tag if the data from the host CPU in response to any commands sent by the reader/writer follows the specifications of the NFC Forum. The emulated device can communicate with any reader/writer, conforming to the specifications of the NFC Forum.
Typical System Layout
* This product does not have a nonvolatile memory. If the power is cut, the internal data is lost. Unlike a FeliCa card there is no function to constantly store data.
* The 212 kbps is the modulation speed of the RF interface.
* The effective speed of data transmission is dependent on the processing capacity of the controller of the cable interface and the wireless interface system.
* After integrating into any (customer) device or gadget, please confirm the communication characteristics of the device with which the NFC Dynamic Tag should respond.
NFC Dynamic Tag (FeliCa Plug) chip
| RC-S926 | ||
|---|---|---|
| Wireless section | Communications method | Conforms to ISO/IEC 18092 (212 kbps Passive communication mode) |
| Operational frequency | 13.56 MHz | |
| Communication speed | 212 kbps | |
| Cable section | Communication method | Triple-wire half-duplex serial interface (Sony's specification) |
| Communication speed | Dependent on data processing speed of Host CPU (Max. 1 Mbps) | |
| Operating temperature | -25C° to +40C° | |
| Storage temperature | -40C° to +125C°*2 | |
| Consumption current (25C°) | Operation mode: 1 mA or less (noload), Standby mode: (RF non-detection): 0.1 μA or less | |
| Package | VQON24 | |
| External dimensions (W×H×D) | 3.8 mm × 3.8 mm × 0.55 mm (Max.) | |
| Packaging type | Tape & reel | |
| Mounting method | Reflow soldering | |
*1 Depends on Host CPU.
*2 Storage temperature of the IC chip in its standalone form.
